Initially I thought this was simply a error by Anjon, so I contacted them and explained to their technical people what I had found. However, it's been more than a year, and not only has Anjon failed to correct the inaccurate information, as you can see in the link above, but they've actually altered some of their other specifications to make them consistent with their false wattage claims. Very hard to interpret this as anything other than a deliberate attempt to mislead.
My measurements on the Anjon BPP3000 show that with a two foot head and essentially unrestricted flow it draws 350 watts, compared to the claimed 150 watts. Here are Anjon's published wattages for the Big Frog pumps verses what I expect them to actually consume, based on my measurements and the current draw specs (before Anjon changed them) for the other pumps:
Anjon Big Frog PumpsThe cost of electricity consumed by a water pump over its lifetime usually far exceeds the cost of the pump itself. Even if you ignore the environmental issues, energy efficiency should be a critical consideration when choosing a pump simply based on economics. Although the Anjon Big Frog pumps otherwise seem to be quality well-made products, Anjon is clearly lying about their efficiency. Don't make the same mistake I did and buy an Anjon pump expecting to save energy, because you won't.
ModelSpecified WattsReal Watts
BF3000150350 (measured)
BF4200250500 (estimated)
BF5500400670 (estimated)
BF63007501140 (estimated)
1 comment:
Russell, I have been reading your blog and thought I would chime in on the pond pump. I bought a JEBAO DCT15000 and really like it. I replaced a 300W AC 5000 GPH pump with this DC variable speed pump to cut back on power usage. Using the variable speed I can turn it down to < 50 W overnight and crank it up to ~120 W (rated at 105W) for the daytime. Feed pause button is nice too. Well worth the extra bucks at $155 through Amazon.
Thanks for your LTSpice posts!
Bill
Post a Comment